Projekt RFID Read-Write

Reference:

• https://en.wikipedia.org/wiki/Serial_Peripheral_Interface_Bus
• http://wiki.lemaker.org/BananaPro/Pi:Pin_definition

• SCLK : Serial Clock (output from master).
• MOSI : Master Output, Slave Input (output from master).
• MISO : Master Input, Slave Output (output from slave).
• SS : Slave Select (active low, output from master).

[root@picka ~]# echo "spi-sun7i" >> /etc/modules
[root@picka ~]# shutdown -r now "SPI module load, test after restart"
[root@picka ~]# lsmod
Module                  Size  Used by
spidev                  6177  0 
spi_sun7i              17962  0 
8192cu                453603  0 
mali_drm                2608  0 
drm                   209014  1 mali_drm
mali                  111136  0 
ump                    51819  1 mali
lcd                     3778  0 

• http://raspmer.blogspot.cz/2015/07/how-to-use-rfid-rc522-on-raspbian.html

[root@picka ~]# aptitude install python-dev
No packages will be installed, upgraded, or removed.
0 packages upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Need to get 0 B of archives. After unpacking 0 B will be used.
                                         
[root@picka ~]# git clone https://github.com/lthiery/SPI-Py.git
Cloning into 'SPI-Py'...
remote: Counting objects: 77, done.
remote: Total 77 (delta 0), reused 0 (delta 0), pack-reused 77
Unpacking objects: 100% (77/77), done.
Checking connectivity... done.

[root@picka ~]# cd SPI-Py
[root@picka SPI-Py]# python setup.py install
running install
running build
running build_ext
building 'spi' extension
creating build
creating build/temp.linux-armv7l-2.7
arm-linux-gnueabihf-gcc -pthread -DNDEBUG -g -fwrapv -O2 -Wall -Wstrict-prototypes -fno-strict-aliasing -D_FORTIFY_SOURCE=2 -g -fstack-protector-strong -Wformat -Werror=format-security -fPIC -I/usr/include/python2.7 -c spi.c -o build/temp.linux-armv7l-2.7/spi.o
creating build/lib.linux-armv7l-2.7
arm-linux-gnueabihf-gcc -pthread -shared -Wl,-O1 -Wl,-Bsymbolic-functions -Wl,-z,relro -fno-strict-aliasing -DNDEBUG -g -fwrapv -O2 -Wall -Wstrict-prototypes -D_FORTIFY_SOURCE=2 -g -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro -D_FORTIFY_SOURCE=2 -g -fstack-protector-strong -Wformat -Werror=format-security build/temp.linux-armv7l-2.7/spi.o -o build/lib.linux-armv7l-2.7/spi.so
running install_lib
copying build/lib.linux-armv7l-2.7/spi.so -> /usr/local/lib/python2.7/dist-packages
running install_egg_info
Writing /usr/local/lib/python2.7/dist-packages/SPI_Py-1.0.egg-info

[root@picka SPI-Py]# cd ..
[root@picka ~]# git clone https://github.com/mxgxw/MFRC522-python.git 
Cloning into 'MFRC522-python'...
remote: Counting objects: 60, done.
remote: Total 60 (delta 0), reused 0 (delta 0), pack-reused 60
Unpacking objects: 100% (60/60), done.
Checking connectivity... done.

[root@picka ~]# cd MFRC522-python 

[root@picka MFRC522-python]# python Read.py
BAPI: Banana Pi!!
BAPI: Banana Pi!!
BAPI: Banana Pi!!
BAPI: Banana Pi!!
BAPI: revision(3)
Welcome to the MFRC522 data read example
Press Ctrl-C to stop.
Card read UID: 100,83,136,50
Size: 8
Sector 8 [0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0]
Card detected
Card read UID: 100,83,136,50
Size: 8
Sector 8 [0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0]
Card detected
Card read UID: 100,83,136,50
Size: 8
Sector 8 [0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0]
Card detected
Card read UID: 100,83,136,50
Size: 8
Sector 8 [0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0]

• http://flows.nodered.org/node/node-red-contrib-gpio
• http://flows.nodered.org/node/node-red-node-bananapi
• http://flows.nodered.org/node/node-red-node-irc

[root@picka ~]# node -v
v0.10.29


sudo npm cache clean -f
sudo npm install -g n
sudo n stable
# version can be switched by: sudo n 0.8.21

[root@picka ~]# node -v

[root@picka ~]# npm install node-pre-gyp
npm WARN package.json node-red-node-bananapi@0.0.2 No README data
npm WARN engine deep-extend@0.4.1: wanted: {"node":">=0.12.0","iojs":">=1.0.0"} (current: {"node":"0.10.29","npm":"1.4.21"})
npm WARN engine hawk@3.1.3: wanted: {"node":">=0.10.32"} (current: {"node":"0.10.29","npm":"1.4.21"})
npm WARN engine cryptiles@2.0.5: wanted: {"node":">=0.10.40"} (current: {"node":"0.10.29","npm":"1.4.21"})
npm WARN engine hoek@2.16.3: wanted: {"node":">=0.10.40"} (current: {"node":"0.10.29","npm":"1.4.21"})
npm WARN engine boom@2.10.1: wanted: {"node":">=0.10.40"} (current: {"node":"0.10.29","npm":"1.4.21"})
node-pre-gyp@0.6.28 node_modules/node-pre-gyp
├── semver@5.1.0
├── nopt@3.0.6 (abbrev@1.0.7)
├── rc@1.1.6 (ini@1.3.4, strip-json-comments@1.0.4, deep-extend@0.4.1, minimist@1.2.0)
├── mkdirp@0.5.1 (minimist@0.0.8)
├── rimraf@2.5.2 (glob@7.0.3)
├── npmlog@2.0.4 (ansi@0.3.1, gauge@1.2.7, are-we-there-yet@1.1.2)
├── tar-pack@3.1.3 (uid-number@0.0.6, once@1.3.3, debug@2.2.0, fstream-ignore@1.0.5, readable-stream@2.0.6, fstream@1.0.9)
├── request@2.72.0 (is-typedarray@1.0.0, oauth-sign@0.8.2, aws-sign2@0.6.0, forever-agent@0.6.1, tunnel-agent@0.4.3, caseless@0.11.0, stringstream@0.0.5, isstream@0.1.2, json-stringify-safe@5.0.1, extend@3.0.0, aws4@1.4.1, combined-stream@1.0.5, node-uuid@1.4.7, qs@6.1.0, tough-cookie@2.2.2, mime-types@2.1.11, form-data@1.0.0-rc4, bl@1.1.2, http-signature@1.1.1, har-validator@2.0.6, hawk@3.1.3)
└── tar@2.2.1 (inherits@2.0.1, block-stream@0.0.9, fstream@1.0.9)